Start with the flash set to the medium setting and the camera at 1/100 for the Tv and 8 for the Av with ISO at 200. With external flash, you should be using manual exposure. If you are using an external flash this is the result of your exposure being too high or too low. This message is a warning that the printer does not have the correct media or size setting to do the size print you have selected. My printer is detected but I get an error message when I go into booth mode that no printer is available This is also the result of a bad or loose cable connection to the camera or printer. You may need to replace bad cables.īooth freezes at “Creating camera control” or “Creating printer control” Connections may have loosened during transport and cause an issue. If you are using a hub check that as well. I asked Wally Carnes, Operations Manager and Booth Guru at Darkroom Software to compile a list of the issues he and his support team hear most often from customers using Darkroom Booth.īooth crashes or freezes during operationĬheck all the USB cable connections especially to the camera. Oftentimes there is a simple answer or quick fix to common support questions.
We know how important it is to keep your photo booth up and running.
